Everyone desires that their appliances get the needed power supply for optimal performance. As such, the stabilizer has become a requirement for every household in recent years.
A stabilizer secures your appliances during electrical power spurts and voltage spikes by retaining a consistent voltage point.
With the microwave oven becoming an essential appliance in every home, it is only proper to check measures to best maintain it for optimal functioning. So does a microwave need a stabilizer?
The microwave oven runs on the regular home voltage and does not necessarily need a stabilizer to function optimally. However, suppose your household power supply is higher than the standard voltage range or your area experiences voltage fluctuations. In that case, it is necessary to use a stabilizer while running your microwave oven to avoid damaging the oven.
This article will explain the best ways to use your microwave oven and how a stabilizer protects electronic appliances during voltage fluctuations.
By the end, you will understand how to keep your microwave oven in good condition and all your home appliances that need a stabilizer.
Do You Need a Stabilizer for Microwave Oven?
A microwave oven does not necessarily need a stabilizer to function optimally except in voltage instabilities in your home.
With technological advancements, most appliances are now energy efficient and require less power.
Therefore you can always be sure that your oven will function effectively without a stabilizer.
Also, most manufacturers suggest stabilizers for appliances with high voltage consumption rates.
However, with the uncertainty in power fluctuations, it would be best to always use a stabilizer on all appliances, especially the most frequently used appliances.
Microwave ovens are indispensable in most homes and have become regularly used appliances in everyday cooking or reheating routines.
As such, it is only proper to safeguard the appliance from potential damage since power fluctuations don’t send any prior warnings.
Although if your home gets a steady power supply, you can always be sure of using your oven even without a stabilizer.
But again, many factors cause electrical power fluctuations, so you can never be too sure when a power surge will happen.
For instance, when a car runs into an electric pole, the sudden power surge could damage your appliances running on your typical home voltage.
It could be a thunderstorm at night when you are trying to fix your favorite meal or reheat your earlier leftovers.
It would help to know that just like the name suggests when you connect your appliance to a stabilizer, it regulates the current flow into that appliance.
As such, you are sure the device will augment low current and step down high current to ensure your appliances function correctly.
Therefore it would be best to contact an expert to check and confirm whether the voltage in your home needs a stabilizer for your appliances.
Regardless, it will be best if you protect your appliances than spend on repairs.
Which Stabilizer Is Best for a Microwave Oven?
To get the best stabilizer for your microwave oven, you must first check the current supply to your home and then confirm the voltage requirement for the stabilizer.
It would be best to determine your microwave’s power consumption rate before opting for a particular voltage stabilizer.
Because a stabilizer giving out less voltage than your microwave oven needs will damage the appliance at the end of the day.
Getting a stabilizer to protect against sudden power spurts would be best for staying in locales with irregular power supply.
The best stabilizer for your microwave oven is the V-Guard VM 300 stabilizer, which has unique features that guarantee optimal performance.
The V-Guard VM 300 stabilizer will safeguard against voltage variations. And also, ensure that your oven always functions at the correct voltage.
The stabilizer has surge protection to secure your microwave oven against unexpected power surges.
The stabilizer also has a heat surplus protector against any excessive voltage supply.
Also, with a voltage cut-off mechanism, you can be sure that your microwave oven is safe during high or low-voltage supply incidents.
While any stabilizer will serve, it is always best to go for the best quality that falls in the range of voltage requirements for your appliance.
Generally, stabilizers play a crucial role in protecting appliances.
The table below contains some of the advantages and disadvantages of stabilizers.
|Impedes against electronic breakdown||An overload can damage appliances.|
|It ensures efficiency even under adverse situations.||Some stabilizers have low response speeds.|
|It helps Save money on utility bills.||The best qualities are usually expensive.|
How Do You Keep Your Microwave in Good Condition?
One of the best ways to boost the lifespan of your microwave and maintain its high-performance rate is by carrying out routine checks and maintenance.
Most people need to check the working conditions of their appliances the day it completely breaks down.
Again, it is always best to take precautions than spend on repairs. You can keep your microwave in good condition in many ways.
Some of the things you can do include the following.
- Clean your microwave regularly to keep off dust.
- Always unplug your microwave oven before starting the cleaning process.
- When not in use, ensure that you cover the appliance to prevent dust build-up.
- Ensure to clean all spills instantly to avoid blemishes and stains.
- Also, cover containers when heating to avoid spilling.
- Ensure to use only microwave-safe containers in your appliance to avoid fire outbreaks.
- Remember to turn off your microwave when you finish cooking.
- It would help to know that you can’t use the microwave for all kinds of foods.
- Connect your microwave to a stabilizer if your area experiences poor power supply.
- You must thoroughly read the user manual for best practices.
- Leave the oven open for some time after cooking to allow an outflow of steam and air.
- Leave at least 10 cm of space around your microwave oven for adequate airflow.
- During heating, you must properly close the door of your oven.
- You can routinely call an expert to check the working conditions of your microwave oven.
Follow the above instructions and keep your microwave oven in good condition for overall usage.
Again it would be best if you remembered that your appliance’s lifespan depends on the maintenance and usage level.
Do I Need to Ground My Microwave?
For safety reasons, it will be best to ground your microwave. However, most people use their microwaves without grounding the appliance.
Grounding cuts down the chance of any electrical shock from your microwave oven. It invariably protects you and your household from electrical excesses or wrecked circuits.
However, the risk of electrocution is generally low. As such, people need to pay more attention to the importance of connecting the ground wire of their appliance.
The earth is neutral; therefore, when you ground a microwave oven, you create room for exchanging charges between the microwave and the earth.
As such, when there is a loose connection between the appliance, the earth prevents the appliance from shocking.
Grounding your appliance is the most effective way of deterring the appliance from holding and transmitting current enough to produce life-endangering impacts.
The configuration of the grounding wire makes it the quickest way for electrical current to pass into the earth.
While most people consider microwave oven grounding as not essential, for your safety, it would help you ground your appliance.
You must understand that the human body is an excellent electrical conductor, as such slight mistakes will get you electrocuted.
Microwave ovens usually have grounded plugs that you are to connect to the receptacle on the wall.
The three prongs are active, neutral, and earthing wires, respectively.
Usually, the earth wire consists of copper, an excellent conductor of electricity. And you are to connect the wire to the ground terminal to discharge electricity from the appliance.
If you need help connecting your appliance to the wall receptacle, you can always call an expert to ensure it is well-grounded before plugging in your microwave ground plugs.
Here are the reasons you should ground your appliances:
- Grounding protects against damage to appliances during any electrical surges.
- Grounding generally harmonizes and directs your appliances’ electrical power, ensuring an equal distribution.
- With the correct proportion of current flowing through your appliances, grounding helps reduce the risks of possible fire outbreaks.
- Grounding appliances make it possible for you to use metals in your appliances safely.
What Other Home Appliances Require Stabilizers?
A stabilizer ensures that your appliances only work as required to offset quick changes in power supply.
While you must connect your regularly used home appliances to a stabilizer, it also depends on the power supply to your area and its regularity.
Regardless, it would be best if you connected all appliances susceptible to little changes in voltage on a stabilizer.
Certain appliances quickly sense a change in current flow and have components vulnerable to the wrong voltage.
Such appliances easily get blown up once there is a minor fluctuation in power supply during usage.
As such, it is wise to use such a device on a stabilizer to protect against abrupt power surges.
Although, it will help to know that some appliances already have built-in surge protectors and suppressors.
Combining the surge suppressors and the stabilizers ensures total protection as the stabilizer easily controls currents above the surge suppressors.
Here are other appliances that require a stabilizer:
- Washing Machines.
- Air Conditioners.
- Microwave Ovens.
- Electrical Fans.
Does a Microwave Oven Require a Dedicated Circuit?
You must connect your microwave oven to a dedicated circuit for safety reasons.
Are Stabilizers Made Differently for Every Appliance?
Yes, stabilizers have an energy limit based on the components of an appliance. Therefore it is always best to confirm the energy needs of your appliance before getting a particular stabilizer.
Can I Remove the Third Prong From My Microwave Power Cord?
Keep the ground prong from your appliance power cord. Except if the situation warrants using an adapter to a two-prong receptacle.