Kenmore Refrigerator Error Codes (Must Know Them)
Kenmore is a household name when it comes to the production of high-quality refrigerators and other kitchen appliances.
Their refrigerators are high quality and durable. However, they may sometimes fail to function correctly, and this could be a result of component failure or error codes.
When these error codes are displayed, the refrigerator stops cooling. Now, this brings the question: what are Kenmore refrigerator error codes?
The Kenmore refrigerator error codes are shown on the temperature display screen due to failure in the components. When these error codes are displayed, the refrigerator may stop cooling. There are different error codes in Kenmore refrigerators, and they all have different troubleshooting methods. All error codes have different causes and also vary from model to model.
Kenmore Refrigerator Error Code Er 1f
The er 1f error code is displayed when the feedback signal from the icing fan motor to the main control board fails for more than 114 seconds.
The icing fan is located in the freezer section and is responsible for supplying cool air to the ice maker.
You can reset these error codes by disconnecting the refrigerator from the power source for about five minutes and then reconnecting it to reset power.
After clearing the error code, it may come back if the icing fan fails to run when the error continues to display after the power reset. It means much ice is forming around the fan, stopping it from running.
To resolve this issue, you will have to remove the fan cover, unplug the refrigerator from the power source, and leave the freezer doors open for 24hrs to allow the ice around the fan to melt. Then, the fan will return to regular operation.
If, after these procedures, the fan still does not work and the error code keeps displaying, it means the fan is faulty and needs to be repaired or replaced.
Of course, you should get a professional to repair or replace the damaged fan if you are not handy with simple home repairs, but if you are, replacing the fan should not be a big problem.
Kenmore Refrigerator Error Code Er Dh
The er dh error code appears when there is an issue with the defrost heater. For example, a faulty main control board or a damaged defrost heater can trigger this error code.
The error code will also appear at the beginning of the defrost process when the defrost sensor is yet to reach the expected temperature of 40°F.
Check the control board or defrost heater to see if any of the components is faulty. To replace the defrost heater. Unplug the refrigerator and remove all the items in the freezer.
Then remove the front panel of the freezer, and you will see the defrost heater, carefully take out the damaged defrost heater and replace it with the new one.
Cover the panel back and reconnect the fridge back to the power source. The refrigerator should be able to function correctly.
Kenmore Refrigerator Error Code Er rF
The rF error code indicates that the refrigerator fan motor is not working correctly.
It could sometimes result from failure in the main control board or much ice formed around the fan preventing it from rotating or might damage the fan.
You can reset the power to clear the rF error code by unplugging the refrigerator for some minutes and then plugging it back in.
If the error code continues to display even after a power reset, you will have to check if the control board or motor is damaged or if there is much ice around the fan.
First, remove the back panel cover and check if there is ice around the fan. Next, unplug the fridge for about 24hrs and leave the door of your freezer open to allow the ice to melt.
You will have to replace the control board or motor if they are damaged. After these procedures, the refrigerator will be able to function correctly.
Kenmore Refrigerator Error Code SY EF
The Kenmore refrigerator error code SY EF indicates an issue with the evaporator fan motor, and cold air is not circulating inside the freezer.
However, these error codes could result from several reasons the refrigerator does not indicate. Therefore, you will have to check extensively and find out where the problem originates.
The most common reason for this error is when frost forms on the evaporator fan, preventing it from circulating cold air in the freezer.
You will have to unplug the refrigerator for about 24hrs and allow the ice to melt before plugging it back in.
Another reason could be a fault in other components, such as the fill tub. You must repair or replace faulty components to clear this error code.
When this error code is displayed, the whole refrigerator may still function. However, it is essential to troubleshoot this quickly to avoid further damage.
Kenmore Refrigerator Error Code Er iF
The error code Er iF is similar to the error code Er 1f which indicates a problem with the icing fan responsible for blowing cool air into the freezer.
A faulty icing fan can prevent your refrigerator from functioning correctly, thus triggering the error code.
When this error code is displayed, remove all food or ice-making materials from the Internal compartments. This process will accelerate defrosting and help the fan function correctly.
Also, ensure that the door of your freezer is closed correctly. And this is because when your refrigerator door is kept open for a long time, it can also trigger the error code to display.
Other reasons, such as failure in the main control board, can also cause the error code to display.
If the error code continues to appear on your refrigerator, you should check the wiring harness because a bit of fault in the wiring can also trigger the error code.
Kenmore Refrigerator Error Code Er FF
This error code indicates a problematic refrigerator fan, though other reasons can also trigger this error code on your Kenmore refrigerator.
However, one of the recurrent causes of this error is the accumulation of frost in the fan.
If this is the situation, you should empty and clean the freezer and ensure the fan is free from the ice before mounting the components and rerunning the refrigerator.
The Er FF error code can also display when there is a problem with the main control board of your Kenmore refrigerator.
You can reset the control board by disconnecting the fridge from the power sources for some minutes before reconnecting it. You should also check the control board for minor wiring problems.
If the error code continues to display, it is advisable to call a professional for possible repairs.
Kenmore Refrigerator Error Code Er CO
The error code Er CO tells you there is an error in communication between the control board and the main power board.
When you notice this error code, you should check the control board, the wiring harness, and the main power board.
The Er CO error code is a unique error and rarely appears on your Kenmore refrigerator.
These error codes are highly sophisticated; therefore, you will need the help of a professional for possible repairs or replacement.
However, if you are handy with simple repairs, you should be able to replace faulty components.
Kenmore Refrigerator Error Code 22 22
This error code pops up only when there is a problem with your ice maker fan motor.
For example, error code 22 22 appears when the ice maker fan motor is damaged or the compressor does not send a signal to the control center.
When this error code is displayed, the freezer will not be able to cool the materials in it properly.
This error code is also a result of a faulty compressor relay or a faulty control center. All these can trigger the error code to display.
The easiest way to clear these error codes from your Kenmore refrigerator is to disconnect the refrigerator from the power source for about 30 minutes and reconnect the refrigerator back in.
If the error code continues to display after the reset, you must check the control center, the compressor relay, and the ice maker fan motor.
If any of these components are damaged, then replacing them should help clear the error code.
Kenmore Refrigerator Error code 5Y EF
The Kenmore refrigerator error code 5Y EF occurs when the fan motor or the control board is faulty or damaged.
The error code is displayed when there is a problem with any of these components.
If the error code does not go away after resetting the power, you should test the sensor wires connecting the evaporator fan and the control board using a multimeter.
And also, check if there are any voltage discrepancies. A high resistance level on the power cable can also trigger the error code to display.
Replacement of damaged components will help to clear the error code 5Y EF from your Kenmore refrigerator.
Therefore, if you are hand with simple home repairs, this should be a simple fixable problem. However, it is advisable to call for professional help if you are not good with simple home repairs.
How to Reset Error Codes On Kenmore Elite Refrigerator?
There are different Kenmore refrigerator error codes, and all have different methods of resetting them.
However, the general method of resetting the Kenmore refrigerator error code is disconnecting the refrigerator from the power source for about 30 minutes and then plugging it back in.
This process should be able to clear all simple Kenmore refrigerator error codes.
Suppose the error code continues to display after the power reset. In that case, there is a particular problem with the refrigerator, which you will need to troubleshoot extensively and resolve.
Here is a table showing a few Kenmore refrigerator error codes, their conditions, and how to reset the error codes.
| Kenmore Refrigerator Error Code | Condition | How To Reset The Error Code |
|---|---|---|
| Er 1f | Icing fan motor problems | Disconnect the refrigerator from the power source and allow the ice formed around the icing fan to melt. If the error code continues to display, you will need to replace the icing fan |
| r DS | Refrigerator defrost sensor error | If the error code continues to display after power reset, the check, and repair wiring or sensor problems |
| 22 22 | Faulty or damaged compressor relay and control board | Check the control center, the compressor relay, and the ice maker fan motor; if any of these components is damaged |
| Er IF | Faulty or damaged ice maker fan | Remove the sensor cover carefully, remove the damaged ice maker sensor and replace it with the new ice maker fan, and rerun the refrigerator. |
| Er CO | Communication error between the control board and the main power board | Check/repair the control board, the wiring harness, and the main power board |
| 5Y EF | A faulty or damaged control board | Check/repair sensor wires connecting the evaporator fan and the control board |
| Er FF | Accumulation of frost on the refrigerator fan | Empty and clean the freezer. Also, ensure no ice is on the refrigerator fan before mounting the components and running the refrigerator. |
| Er DH | Faulty or damaged defrost heater. | Disconnect the refrigerator from the power source for some minutes, then reconnect it back in. If the error code continues to display, then you should check if the defrost heater is damaged and replace it. |
| SY EF | Evaporator fan motor error | Unplug the refrigerator from the power source for some hours, allow the ice around the evaporator fan to melt, and then plug it back. |
Conclusion
Kenmore refrigerator error codes help you to detect the problems that are affecting your Kenmore refrigerator.
The easiest way of resetting the Kenmore refrigerator error codes is by disconnecting the refrigerator from the power source for about 30 minutes and reconnecting it.
If these error codes continue to display after power rest, then there is a specific problem that you will need to troubleshoot extensively and resolve before it worsens.
There are different Kenmore refrigerator error codes with different methods of resolving them.
