6 Reason Your Whirlpool Duet Dryer Beeps Once & Won’t Start!
Doing laundry is better when the washing appliances usually function. Unfortunately, there are those times when the delay is inevitable.
Trying to dry your wet clothes with a Whirlpool dryer that beeps and won’t start is harsh and unpleasant.
If the dryer is new, there might be a minor issue, but you might face replacement if it’s persistent. Nonetheless, you must first discover the possible problems before proffering a solution.
Your Whirlpool dryer will beep and won’t start if the drive motor is faulty. Also, it will only start if power flows to the dryer. However, continuous beeping is mostly an indication that there might be a problem. However, if it beeps once, there might be other issues.
In this article, I will explain why your Whirlpool duet dryer beeps once and won’t start. After everything, you’ll know how to fix the problem.
Why Does My Whirlpool Duet Dryer Beep Once and Won’t Start?
Your Whirlpool duet dryer may beep once and won’t start for various reasons. However, the dryer is still intact.
I understand how unpleasant it could be when you have your schedule planned when a faulty dryer tries to ruin it.
For instance, the dryer begins acting up if you have a job interview and need to wear a particular tie. You could almost lose your wits.
Nonetheless, it would be best if you remained calm to discover the problem to find a quick solution.
Here are the following reasons why your Whirlpool duet dryer beeps once and does not start
#1. Faulty Drive Motor
The drive motor is responsible for the rotation of the dryer during a cycle. The belt and pulley system lets the dryer spin the tub around on its axle while generating heat.
Unfortunately, the Whirlpool dryer will not start if the drive motor goes bad. The beeping sounds indicate something is wrong with the drive motor.
However, checking if the drive motor is faulty should come after you confirm that other components are in great shape.
Also, you can troubleshoot the dryer to discover the error codes to locate the exact problem.
#2. The dryer Door Is Open
If a dryer door is open, it will refuse to start. The door must latch properly for the dryer to spin your clothes around, generating heat.
So, you must ensure that the door is closed each time you use the dryer. This problem is the most common issue that makes the Whirlpool duet dryer beep and won’t start.
The door sensors are so that the dryer will not function if the door is open. So, no matter how much you press the start button, the dryer will not bulge.
#3. The dryer is Not Receiving Power
Power is crucial to the dryer’s performance. A dryer is an electrical appliance that converts electrical energy to heat energy.
Consequently, electricity is a significant factor here. So, if the dryer is not receiving power, it will not work. There are various reasons why your dryer will not have power.
Here are a few examples.
- If the power cord is not in the line
- If the socket is damaged
- If the power cord keeps losing contact
- If something is wrong with the dryers control panel
These reasons are plausible enough to prevent your dryer from getting current and refusing to start.
#4. No Power in the Circuit Breaker
The kitchen’s power source is the circuit breaker that houses the change-over switch. This electrical panel brings electricity to the kitchen or any part of the house.
Usually, there is a general panel somewhere in the house. However, according to the house’s electrical needs, there may be a few other sub-panel.
If there is a problem with the circuit breaker and it cannot bring power, the dryer will not start.
The problem may be that the circuit breaker is damaged or not on. Maybe, someone put it off, or rodents bit a wire. Nonetheless, it would help if you fixed it before any appliance could work.
#5. Control Board Problem
The control board is an integral part of the Whirlpool dryer. It gives the commands, and the dryer carries them out.
But, if the control panel has a problem, your dryer will have no power. For instance, the panel requires around 120V to function.
If the power coming from the circuit is less than this, the dryer will not work. Also, if the circuits on the board are inadequate, the dryer cannot work unless you replace it.
#6. Lint Buildup in the Trap
As much as a dryer is to generate heat for wet clothes, it’s best if it does not overheat. So, if there is excess lint in the trap, it could result in overheating.
This overheating will not allow the Whirlpool dryer to start when it should. You can check the lint trap and remove the contents. You can prevent overheating, and your Whirlpool duet dryer can work perfectly.
How Do I Fix a Whirlpool Duet Dryer That Beeps Once And won’t Start?
Fixing the dryer is relatively easy. Each problem above has solutions, and I am glad to guide you through it.
Here are the problems and how to fix them.
#1. Faulty Drive Motor
How to fix it:
Fixing the motor is quite technical and requires close attention. Leave this to a licensed technician or Whirlpool support. But, if you insist, here are the following steps.
#2. The dryer Door Is Open
How to fix it:
- First, ensure that you always lock the door before you turn on the dryer.
- Check for obstructions that may hinder the door from closing correctly.
- Also, it would help if you did not overload the dryer. Instead, separate the clothes into batches to keep the dryer manageable.
#3. The dryer is Not Receiving Power
How to fix it:
- Confirm that the socket is working and power is coming to it from the circuit breaker.
- Next, check the power cord to see if it is still in great shape without naked wires sticking out.
- Unplug the cord and connect it back to the socket after 30 seconds. This way, you have reset the dryer, and normal function is possible.
#4. No Power in the Circuit Breaker
How to fix it:
- First, check the circuit breaker to see if there is light.
- Please turn off the public power source and turn it on after a minute to reset it.
- If there is a problem, call a technician for support. Call for help if you do not have any experience with electrical appliances, as it is dangerous.
- But, of course, if the problem is minor, resetting the circuit breaker will solve it.
#5. Control Board Problem
How to fix it:
- First, you must purchase the exact model’s control panel.
- You would need a ¼ inch-nut driver and a flat-blade screwdriver.
- Next, please disconnect the power from the dryer by unplugging it from the socket.
- Then move the dryer from the wall to access the top panel.
- Loosen the ¼ inch screws and remove the top panel, then set it aside.
- Remove the two screws that hold the bracket that the control board rests on.
- Disconnect the wire harness connections and use the flat-blade screwdriver to remove the locking tab.
- Loosen the single ¼ inch screw that holds the board to the bracket. Then turn the underside of the board and press the locking tab to release it.
- Finally, place the new board on the bracket, secure the position, and reconnect the wires and screws. Close the lid and connect to power; everything should work fine.
#6. Lint Buildup in the Trap
How to fix it:
- Disconnect power from the dryer and wait a minute.
- Locate the lint trap and remove it from its position.
- Use a brush to remove the lint from the trap.
- Then soak it in hot water to do deep cleaning.
- Rinse, and fit it back.
Why Does My Whirlpool Duet Dryer Turn on But Not Start?
Your Whirlpool duet dryer will turn on and only start if there is power going to the dryer.
Since it requires power to run, it will not work unless you plug it in correctly. Your dryer should work as usual as soon as you fix the power issue.
First, check the power cord and the circuit breaker. If the cord and circuit breaker are in great shape, you have nothing to worry about.
But, if you need to learn the difference between the power cable and the circuit breaker, let me show you.
Here is a table highlighting the differences.
| Power Cord | Circuit Breaker |
|---|---|
| It powers only the appliance. | It brings power to an area of the house. |
| It is a wire that extends to the socket. | It is a combination of wires. |
How Do You Reset a Whirlpool Duet Dryer?
Sometimes, your dryer might act up because of a few problems. You must pay close attention to it and reset it when necessary. This way, you can restore things to normal and prolong their lifespan.
You can reset your Whirlpool duet dryer in these easy steps.
- Disconnect the dryer from the power source.
- Then turn off the circuit breaker for the laundry room.
- Wait for about half an hour, then connect it to power. This action should restore power.
Final Thoughts
If your Whirlpool duet dryer beeps and won’t start, there may be no power in the appliance.
Also, there are other reasons, like open doors and control panel issues. Fortunately, you can quickly restore to normal in a few steps.
