Whirlpool Refrigerator Water Filter Location!
You must change the water filter regularly if you own a Whirlpool refrigerator. To do that, you need to know the location of the water filter on your Whirlpool refrigerator.
Also, keep in mind that the location varies on different models.
The Whirlpool refrigerator’s water filter is usually in the upper right back corner of the interior part of the refrigerator. Or in the grille at the refrigerator’s base. The exact location depends on the model.
Where is the Water Filter in an Old Whirlpool Refrigerator?
Older Whirlpool refrigerators have filters in the base grill on the outer part of the refrigerator.
So if you’re looking for the water filter on an old Whirlpool refrigerator, check the base of the refrigerator.
You’ll find a circular plastic knob. Gently turn the knob and pull, and you’ll find the water filter.
Whirlpool manufactured older-style refrigerators before 2002. So, if you’re unsure whether yours is an old model, you can know by checking the year of manufacture.
Most old models will have a filter behind the refrigerator. The water filter location is much more convenient for newer models of the Whirlpool refrigerator brand.
The filter in newer models is usually inside the refrigerator, in the top right-hand corner of the fridge. For other newer models, the filter is inside the door close to the water and ice dispenser.
Finding the water filter in your old model Whirlpool refrigerator isn’t tricky, just so long as you know where to look.
If you’re unsure and still have your instruction manual, then you can check it to be sure. Furthermore, there may be a few variations.
Even with products of the same brand, sometimes the different models have slight distinctions. However, should you not find the filter in any of these places, there’s another option.
For most refrigerators, including Whirlpool refrigerators, it is common to find the water filter in one of two places:
- The grille on the refrigerator’s base.
- The upper right-hand corner is inside the refrigerator.
Water Filter Location in Whirlpool Side by Side Refrigerator
Usually, the water filter in a Whirlpool side-by-side refrigerator is located inside the refrigerator door or at the bottom corner.
In some side-by-side refrigerators, the compartment that houses the water filter is inside the upper right corner of the refrigerator.
Like other Whirlpool refrigerators, there is no uniform location for the water filter on Side by Side refrigerators.
Different models have different features, and the location of the parts varies widely from model to model.
Usually, Side Side Built-in refrigerators have a water filter behind the access panel above the refrigerator doors.
On the other hand, in regular Side by Side refrigerators with typical water filters, the water filter cartridge is located in the upper right corner of the refrigerator.
On the Side by Side refrigerator with a water filter, check for the filter behind the fresh food compartment, in the upper right corner.
Given the location of the water filter, you will find that when you want to remove it, you need to remove the upper shelf to get better access.
Additionally, if you have your refrigerator’s manual, you can check the manual for the location of the water filter.
Usually, the manual will have a diagram of the refrigerator and its compartments to aid you.
Also, when you have a Side by Side refrigerator, you need to know the location of the water filter button.
The water filter button also differs depending on the model of the refrigerator. Usually, the water filter button is outside the refrigerator, above the water tap.
Whirlpool French Door Refrigerator Water Filter Location
For your Whirlpool French door refrigerator, you will find the water filter in the cooling compartment of the refrigerator.
The water filter will be on the top-right-hand corner of the chamber. For some models, the water filter is in the upper right corner of the refrigerator.
There is also a third likely location for the water filter in your Whirlpool refrigerator. Check the left-hand corner of the base grill.
Usually, these are the three likely places to look for the water filter in a Whirlpool refrigerator.
For the water filter in the top-right-hand corner of the refrigerator’s interior, you must undo two screws from the top plate to access it.
So, if you have seen several French Door model Whirlpool refrigerators, do not assume that the location of the refrigerators is uniform across the board.
But, the two commonest locations for Whirlpool French door refrigerators are:
- The upper right side of the refrigerator.
- The base grille.
Also, there are two types of filtering units that you are likely to find in your Whirlpool refrigerator.
And often, the type of filtering units installed also affects the location of the water filter. Usually, the two types of water filtering units you’ll find are.
- Push-in filters
- Twist on filters
Most of the time, if the refrigerator has a push-in filter, you will find the water filter unit behind the bottom grille.
And the push-in filters also have ejector buttons you can push when you want to loosen the filter and change it.
In the case of a twist on filters, you’ll most likely find them inside the refrigerator compartment. Either on the top-right-hand corner of the fridge or the bottom corner.
However, that isn’t always the rule. You can find that twist-on water filters can also be in front of your refrigerator.
Thus, always check the instruction manual to ensure you know the exact location of the water filter on your Whirlpool refrigerator.
In addition, the table below will provide information on Whirlpool refrigerator models and the location of the water filter.
| Whirlpool Refrigerator Model | Location Of Water Filter |
|---|---|
| Old Whirlpool refrigerator | Base grille |
| Side by Side Refrigerator | Inside the door at the bottom right corner |
| French Door Refrigerator | Base grille upper right-hand corner |
How do I Remove Whirlpool Refrigerator Water Filter Without Cap?
Removing a Whirlpool refrigerator water filter is a straightforward task. But to do that, you have to know the kind of water filter you have.
Whirlpool refrigerators use either a twist-on filter or a Push button filter. So, if yours is a twist on the filter, follow the instructions below to remove the water filter.
- Find the water filter. It will be in the upper right-hand corner of the fridge.
- Locate the eject button around the water filter.
- Press the button all the way.
- Turn the water filter slightly to the left.
- Pull the water filter out.
- Typically, you’d have to remove the cap, but if the cap is already damaged or removed, you’re all good and done.
On the other hand, if yours is a push-button filter, the process may differ slightly.
- Locate the water filter. It should be behind the base grill or the upper right corner of the refrigerator’s interior.
- Open the water filter compartment. You may need to lift the door of the compartment or pull down the door, depending on the model.
- Find the eject button. Usually, the filter should have a button to remove the filter. You will find it at the button of the grill.
- Press the button in. That should disconnect the water filter from the main filter assembly.
- When it’s disengaged, remove the filter.
- You can pull it out or twist it counterclockwise to get it out. The mechanics of that depend on the model.
Usually, since the water filter is a part of the refrigerator that you need to replace often, it is easy to remove.
Additionally, many Whirlpool refrigerators have their water filters in the grille area of the refrigerator, near the bottom front of the fridge.
So, removing and replacing water filters in that part of the refrigerator is usually easy. But, you may encounter some difficulty, or the water filter may get stuck.
Such difficulty may be because you didn’t turn the knob the right way, or maybe you didn’t push the button all the way. Either way, if you encounter any resistance, the filter is stuck.
How to Replace the Water Filter in a Whirlpool Refrigerator? (Step by Step)
The manufacturers recommend changing the water filter on your whirlwind refrigerator at least every six months.
Changing the filter is very important. It ensures that you get clean and fresh drinking water.
If you fail to change the water filter as required, the contaminants that the filter screens out will clog the filter and will not work as it should.
As a result, the dispensed water will contain impurities and contaminants. Thus, you need to change the water filter as required. And you can do that in the following steps.
#1. Step 1
First, locate the cover of your water filter. The filter cover should be in your refrigerator’s upper right-hand corner of the base grille. If you’re not sure, check the refrigerator manual.
#2. Step 2
If the filter is in the base grille, put a towel so that water doesn’t splash over your floors. If it’s in the refrigerator’s interior, remove any items that may be obstacles.
#3. Step 3
If the filter is in the grille base, you can remove it by pressing firmly on the button located on the left side of the filter. If there isn’t any button, turn the filter counterclockwise to release it.
#4. Step 4
Once you’ve released the old filter, pull it out of the refrigerator. If it doesn’t budge, apply more pressure on the release button. Or turn the water filter more firmly.
#5. Step 5
With most Whirlpool refrigerators, you need to unscrew the cap from the old filter and put it on the new one. Then, make sure you transfer the cap.
#6. Step 6
Put the new filter into the water filter slot. You can either turn the new filter clockwise or push it in until you hear a click, which means it has locked into place.
Flush the system out. Usually, Whirlpool recommends that you use four gallons of water.
Conclusion
The Whirlpool refrigerator’s water filter can be located either in the grille at the base or in the upper right corner.
The water filter’s exact location depends on your Whirlpool refrigerator’s model.
